Skip to content
Back to posts

Load Planning Software in Kenya: Fill the Truck Without Guessing

Load Planning Software in Kenya

load planning software in Kenya is judged on a Tuesday morning at a godown on Mombasa Road, when twenty-six pallets wait and the truck can legally carry twenty-two.

The other four go back inside, or the truck leaves overloaded and meets a scale at Mlolongo with a fine attached.

The decision takes ten minutes on paper and forty on a clipboard. It takes ninety seconds on a screen that knows the body, the axle limits and the drop order.

load planning software in Kenya is not a spreadsheet with a nicer font. It is the difference between filling a truck and hoping the loader had a good morning.

The Tuesday Morning When 26 Pallets Meet a 22-Pallet Truck

A load plan starts with three numbers that most fleets keep in three places: the body volume, the permitted payload and the drop list.

When those numbers live in different heads, the loader fills until the doors will not close and the driver discovers the weight at the first bridge.

A plan that shows all three at once lets the loader stop at the right pallet rather than the last possible one.

The cost of guessing is not only a fine. An overloaded truck burns more fuel, wears its springs and brakes later on the descent to Naivasha.

Underloading is quieter and more expensive over a year. A truck leaving with 60 per cent of its capacity four days a week is a business losing money politely.

load planning software in Kenya makes both errors visible before the wheels turn, which is the only time either can be fixed cheaply.

The first job is a clean product master: dimensions, weight, stackability and whether the item can lie on its side.

Most fleets discover that a third of their catalogue has never been measured properly, and the plan inherits every wrong figure.

load planning software in Kenya is only as honest as that master data, which is why the measuring tape comes before the licence.

Volume, Weight and the Space Between Them

A tonne of maize occupies about 1.4 cubic metres. A tonne of crisps occupies closer to fourteen, and both weigh the same on a bridge.

Road freight in Kenya usually prices general cargo at one cubic metre to 250 kilograms, which is a crude bridge between the two.

A truck can be full and light, or heavy and half empty, and the plan must know which condition it is in.

Cement, steel and cooking oil hit the weight limit long before the roof. Mattresses, packaging and furniture hit the roof at half the payload.

load planning software in Kenya that calculates both utilisation figures side by side stops the argument about why a full-looking truck is losing money.

The volumetric ratio is a commercial tool as much as an operational one. It tells a sales team when to charge by cube rather than by tonne.

Mixed cargo makes the arithmetic harder. A load of tiles with a pallet of sanitaryware is heavy at the bottom and fragile at the top.

load planning software in Kenya that reports the volumetric ratio per consignment tells a sales team when the cube, not the tonne, is the constraint.

A planner that flags the mismatch before loading saves a rebuild on the bay, which is the most expensive place to discover geometry.

load planning software in Kenya should show the weight curve along the body, not just a single total at the bottom of the screen.

Axle Limits and the Scale at Mlolongo

A three-axle truck at 26 tonnes gross is legal on most Kenyan routes. Distribute that weight badly and the rear axle carries more than its share.

The bridge does not care about the total if one axle is over. Enforcement reads the axle load, and so should the plan.

Weighbridges at Mlolongo, Athi River, Gilgil and Mariakani are regular stops, and a repeat overload is a court appearance rather than a conversation.

load planning software in Kenya should hold the axle configuration of each vehicle and place heavy pallets over the drive axles first.

Steer axle weight matters too. Loading everything behind the cab lifts the front wheels and turns a straight road into a negotiation.

Load height changes the centre of gravity. Two metres of cement stacked high on a winding descent to Kericho is a rollover waiting for rain.

load planning software in Kenya should hold the tare weight of each body, because a light aluminium body and a steel flatbed carry different payloads on the same route.

A plan that caps stack height by product rather than by available space is a safety document, not a convenience.

load planning software in Kenya that warns when the centre of gravity moves outside a defined band gives a transport manager something to defend in an inquiry.

The driver should see the axle figures on the trip sheet, because he is the last person who can refuse the load before the gate.

Sequencing a Multi-Drop Route Backwards

A truck doing eleven drops in Nairobi should be loaded in reverse order. The first delivery sits nearest the door, the last against the bulkhead.

Loading forwards is the most common mistake on a busy bay, and it costs twenty minutes at every stop after the first.

load planning software in Kenya should generate the load sequence from the route plan, not the other way round.

Time windows complicate it. A school that closes at three and a factory that opens at eight cannot be sequenced by distance alone.

The planner should respect the window first, then the geography, then the weight distribution, in that order.

Fragile items ride last on and first off only if the route allows it. Otherwise they travel in a fixed bay with a strap and a note.

A load sheet that names the bay for each drop, printed by load planning software in Kenya, means the loader does not have to think in reverse under time pressure.

A sequence that changes at seven in the morning should reprint the load sheet, because a driver working from a stale list will improvise.

load planning software in Kenya that recalculates the sequence when a drop is added keeps the bay and the road in agreement.

Every re-sequence costs a rebuild if the truck is already loaded, which is why the cut-off time matters more than the algorithm.

Loading Bay Time and the Queue at the Gate

Three bays serving eighteen trucks a day means each truck has about forty-five minutes of bay time, including paperwork.

A truck that waits ninety minutes has consumed two slots, and the queue at the gate is the visible symptom of a planning failure.

Loading time depends on pallet count, not weight. Twenty pallets of cement take longer than six crates of machinery.

load planning software in Kenya should estimate bay time per load and book the slot, so the yard schedules against a number rather than a hope.

Forklift availability is the hidden constraint. Two trucks needing the same reach truck at nine in the morning will both be late.

Detention charges start after the agreed free period, usually four hours. At KES 2,000 an hour, a bad plan becomes an invoice.

Staging the load before the truck arrives is the simplest fix. Pallets assembled and wrapped on the floor cut bay time by a third.

load planning software in Kenya should send the pick list to the warehouse two hours before the slot, so staging happens while the previous truck is still loading.

load planning software in Kenya that issues a pick list to the warehouse turns loading into a transfer rather than a search.

A yard that knows which truck is next also knows which forklift to send, and the gate stops being a waiting room.

Partial Loads, Consolidation and the Shared Truck

A customer ordering six pallets to Nakuru does not need a full truck, but the truck still costs the same to send.

Consolidating two customers onto one body halves the cost per pallet and doubles the complexity of the load plan.

load planning software in Kenya that matches part loads by route, date and product compatibility turns a loss-making run into a margin.

Compatibility is not a detail. Chemicals beside food, scented soap beside tea and wet goods above dry cartons are all refusals waiting to happen.

The consolidation rule should be explicit in the system, not a judgement made by a loader at six in the morning.

Shared trucks also share liability. If one consignee’s pallet is crushed, the whole load is delayed while the argument runs.

load planning software in Kenya that keeps a per-consignee pallet count makes the split visible before the truck leaves, which is when a rebuild is still cheap.

Photograph the load after securing it, with the plan on the screen behind it, so the condition at departure is documented.

load planning software in Kenya that holds the consignment split per pallet makes the claim conversation short and factual.

A part load that cannot be consolidated should carry a minimum charge, because a half-empty truck to Eldoret is a subsidy to the customer.

Fragile, Heavy and Awkward in the Same Body

Glass, ceramics, eggs and solar panels travel badly with drums of oil, however carefully the loader stacks them.

The plan should assign a fragility class and a stacking rule per product, then refuse combinations that break either.

Heavy items belong low and over the axles, which usually means loading them first and building the fragile cargo around them.

load planning software in Kenya that enforces a maximum stack height per fragility class prevents the crushed carton at the bottom of a four-high pile.

Awkward shapes are the real test. A twelve-metre steel beam and a pallet of bread do not belong on the same truck, whatever the cube says.

Strapping and dunnage need to appear on the plan as line items, because a load that needs eight straps and has four is a risk.

A simple compatibility matrix inside load planning software in Kenya can block the worst pairings before a loader has to explain why the tiles are on top of the glass.

Axle weight and fragility often pull in opposite directions, and the planner’s job is to show the trade-off rather than hide it.

load planning software in Kenya that scores a load for both stability and damage risk gives the loader a reason to reorganise.

The final check is physical: walk the body, push the top layer, look at the gaps. Software cannot feel a loose pallet.

The Loader’s Clipboard and the Screen

A clipboard is not stupid. It is fast, it survives a dusty godown and it never asks for a password.

What it cannot do is recalculate when a pallet is added, and that is exactly when most loading errors happen.

The practical answer is both: the screen produces the plan, the clipboard carries the last printed version, and the loader writes only exceptions.

load planning software in Kenya should print a load sheet that matches the yard’s language, with bay numbers and pallet counts large enough to read at arm’s length.

A tally clerk marking each pallet on a tablet removes the transcription step at the end of the shift.

Where the loader disagrees with the plan, the disagreement should be recorded. A pattern of overrides in one bay is a data problem, not a discipline problem.

A printed sheet that carries a version number and a time stamp, generated by load planning software in Kenya, stops two people working from different plans on the same bay.

Photographs at completion close the loop. The plan says twenty-two pallets, the photo shows twenty-two, and the invoice follows.

load planning software in Kenya that captures the override reason turns a clipboard culture into a feedback loop within a month.

Loaders who are consulted on the screen’s layout use it. Loaders who are handed a tablet and a warning do not.

Last-Minute Additions at Four in the Afternoon

A customer calls at four and asks for two more pallets on the Kisumu truck that loads at six. This is normal, not exceptional.

The question is whether the addition fits the weight, the volume, the sequence and the axle distribution, and the answer needs to arrive in minutes.

load planning software in Kenya that recalculates the whole plan on insertion answers it before the customer finishes the sentence.

Without that, the loader squeezes the pallets in and the driver discovers the axle problem at Gilgil.

A cut-off time is still necessary. After it, the addition becomes tomorrow’s load or a dedicated trip with a price attached.

load planning software in Kenya should publish that cut-off on the customer portal, so the request arrives as a rule rather than an argument with a dispatcher.

The price matters. A late addition that forces a re-sequence costs bay time, fuel and sometimes a missed window at the first drop.

load planning software in Kenya that records the time of each change builds the evidence for a late-order surcharge.

Frequent late additions from one customer are a commercial pattern, and the planner’s change log is the document that proves it.

A plan that absorbs every change without cost is a plan that quietly subsidises poor ordering discipline.

Fuel Cost per Trip, Not per Kilometre

A loaded truck running Nairobi to Kisumu returns about 3.5 kilometres to the litre. Empty, the same truck returns closer to five.

At KES 190 a litre, the loaded run burns roughly 100 litres, which is KES 19,000 before the driver touches the wheel.

The difference between a well-planned load and a badly planned one is often a second trip that should not have been necessary.

load planning software in Kenya that compares planned fill against actual fill per trip shows how much fuel is spent carrying air.

Cost per pallet is the number to watch. Divide the trip cost by pallets delivered and compare the same lane month to month.

A route that costs KES 2,600 per pallet in January and KES 3,300 in March has a planning problem, not a diesel problem.

Backloading changes the arithmetic completely. A truck that returns with six pallets of empties pays for part of its own fuel.

A fuel figure per trip, produced by load planning software in Kenya, also exposes the routes where a detour for one drop costs more than the drop is worth.

load planning software in Kenya that suggests a backhaul before the truck leaves the yard is worth more than a fuel card discount.

Idling at the gate is part of the same bill. Forty minutes of queue at the loading bay is two litres and a late departure.

Pallet Patterns and the Geometry of a Truck Body

A standard 1.2 by 1.0 metre pallet fits a 2.4 metre wide body two across with a small gap, or three across if turned.

A 12-metre body holds thirty-three pallets in theory and twenty-six in practice once the door swing and the wheel arch are counted.

The gap between theory and practice is where most arguments about capacity begin, and it is measurable.

load planning software in Kenya should model the body, not the nominal tonnage, with door clearance and wheel boxes included.

Pinwheel patterns help with mixed pallet sizes, but they cost stability and confuse a loader working in a hurry.

Double-stacking is only safe when the bottom pallet is rated for it and the product above can bear the weight of the one above that.

A stack rule per product inside load planning software in Kenya is cheaper than replacing a pallet of pressurised drums that collapsed at the second speed bump.

A plan that shows a side elevation as well as a floor plan catches the overheight pallet before it hits the roof.

load planning software in Kenya that stores the pattern per vehicle type means a new loader can build the same wall without relearning it.

The best pattern is the one the yard can repeat on a wet Friday, not the one that saves one pallet in a diagram.

Returns, Empties and the Backhaul

Every outbound trip creates a return: empties, crates, pallets, rejected goods and the occasional drum.

A truck that leaves Kisumu empty has paid for the journey twice, once out and once back.

load planning software in Kenya should reserve space for expected returns at the planning stage, not discover them at the customer’s gate.

Rejected goods are the awkward case. They come back unplanned, often wet or damaged, and they need a bay on arrival.

Empties are predictable. A bottler knows it will collect 400 crates, and that volume belongs in the plan before the truck departs.

Backhaul pricing is where a planner earns his salary. A returning truck with twelve pallets of maize meal covers most of its fuel.

load planning software in Kenya that lists expected returns on the outbound plan gives the driver a reason to leave space instead of filling the body.

load planning software in Kenya that matches outbound and return loads by date and lane turns an empty leg into a paid one.

Pallets themselves are an asset. A missing pallet is KES 800, and a fleet that never counts them buys the same pallet four times a year.

A return manifest, generated with the outbound plan, closes that gap without a separate system.

The Trip Sheet a Driver Can Actually Use

A driver needs four things on one page: where to go, in what order, what is on board, and who to call.

Most trip sheets carry eleven columns and no answer to the question the driver actually asks at the gate.

load planning software in Kenya should print a sheet with drop number, address, contact, pallet count and the cash or paperwork expected.

Weight and axle figures belong on the same page, because a driver who is stopped needs to show them without a phone call.

Sequence changes during the day should reach the driver as a message, not as a reprinted sheet left at the office.

A driver who receives the re-sequence on his phone, from load planning software in Kenya, does not have to choose between the paper in his hand and the instruction on the radio.

A driver who understands why the load is sequenced a certain way will protect it. One who is handed a list will rearrange it at the first stop.

load planning software in Kenya that shows the next two drops on the driver’s phone keeps the sheet and the road aligned.

Signature and photograph capture at each drop closes the loop between the plan and the delivery.

The trip sheet is the interface between the office and the road, and a bad one costs more than a bad algorithm.

Forklifts, Weighbridges and the Loading Clock

A forklift moves about twenty pallets an hour in a clear bay and eight in a crowded one. The bay layout decides which figure applies.

Staging lanes marked on the floor cut loading time more than a new forklift does, and they cost paint.

load planning software in Kenya should sequence the pick list in the order the forklift will travel, not the order the customer ordered.

An on-site weighbridge is the cheapest verification available. Weigh the truck before and after loading and the plan is checked against reality.

Without a bridge, axle load can only be estimated, and estimates drift when a loader adds one more pallet to balance the wall.

A monthly calibration of the bridge and a monthly audit of three loads keeps the estimates honest.

load planning software in Kenya that stores actual weight per trip against planned weight builds a correction factor for each product line.

The loading clock should start when the truck arrives, not when the first pallet moves. Gate-in and gate-out times tell the truth about the bay.

A yard that measures its own loading time stops blaming traffic for a delay that happened before the truck left.

When the Customer Changes the Order at the Gate

A customer signs for twenty pallets, then asks for two to be left behind because the store is full. This happens weekly.

The driver cannot simply remove them, because the manifest, the invoice and the load plan all say twenty.

load planning software in Kenya should allow a partial acceptance at the door, with the reason and the signature captured on the spot.

The two pallets then need a decision: return to the depot, wait for a second attempt, or redirect to another branch.

Each option has a cost, and the plan should show it before the driver improvises a solution in a car park.

A redelivery fee is defensible when the record shows the customer refused an agreed delivery window.

Without that record, the carrier absorbs a second trip and the customer learns that refusing at the gate is free.

load planning software in Kenya that updates the manifest on a partial acceptance keeps the invoice honest and the return load planned.

The driver should never negotiate a discount at the gate. He can record a refusal, and the office can price the recovery.

Weight Distribution and the Rollover Risk

A rollover is rarely caused by speed alone. It is caused by a load that sits too high or too far to one side.

A truck with a high centre of gravity leans further in a corner, and Kenyan roads provide plenty of corners with poor camber.

load planning software in Kenya should show the lateral balance of the load, not only the front-to-rear split.

Two heavy pallets on the right and twenty light ones on the left is a legal load that handles badly on the descent to Mai Mahiu.

The plan should place the heaviest items on the centreline and low, then build outwards and upwards.

Securing matters as much as placement. A load that shifts in a corner changes the centre of gravity in a second.

A strap count on the plan, based on load weight and product type, removes the guesswork at the tailgate.

load planning software in Kenya that records the securing method per trip gives an insurer something to read after an incident.

Drivers should be trained to refuse a load that looks wrong, and the plan should make that refusal easy to justify.

Measuring Fill Rate Without Fooling Yourself

Fill rate is easy to fake. Measure by weight only and a truck of mattresses looks half empty; measure by volume only and a truck of cement looks the same.

A useful figure needs both, plus a target per lane and per vehicle type.

load planning software in Kenya should report weight utilisation, volume utilisation and the limiting factor for every trip.

The limiting factor is the useful part. A lane that hits volume at 60 per cent of payload needs a different vehicle, not a harder push.

Averages hide the problem. One full truck and one half-empty truck average to 75 per cent, and the business still loses money.

Report the distribution, not the mean. The share of trips below 70 per cent is the number a manager can act on.

load planning software in Kenya that ranks lanes by wasted capacity each month turns a vague efficiency drive into a list.

Customers should see their own fill rate. A shipper sending six pallets twice a week may consolidate once and save both parties money.

A fill rate target without a cost model is a slogan. Pair it with fuel and bay time and it becomes a decision.

Integrating the Load Plan With the Invoice

A load plan that ends at the bay door is a warehouse tool. One that reaches the invoice is a commercial system.

The pallet count on the plan should be the pallet count on the invoice, with no retyping between them.

load planning software in Kenya should pass the trip identifier, the pallet count and the weight to the billing system automatically.

Rate cards by weight band depend on that number. A 24-tonne load billed at the 18-tonne rate is a recurring loss.

Surcharges for waiting time and redelivery also need the plan’s timestamps, or they become a negotiation at month end.

A customer portal showing the planned load, the delivered load and the difference reduces the credit note conversation.

load planning software in Kenya that reconciles planned against actual per trip exposes the gap between what was sold and what was carried.

The finance team should see the same screen as the planner, because a load that is cheap to plan and expensive to bill is not cheap.

Reconcile monthly. A pattern of shortfalls in one lane is either a planning error or a billing error, and both are fixable.

Leave a Reply

Your email address will not be published. Required fields are marked *

Explore Dexa

Tools that match how Kenya moves

One Dexa. Two focused products.

Choose the tools that match how you move.